Opening Drawer Workshop… If this message stays on screen, download the HTML and open the saved file in Chrome or Edge.

Drawer WorkshopPlan it. Measure it. Make it.
Saved on this device
SET UP THE REAL DIMENSIONS

Drawer & materials

Enter actual drawer measurements. Enter these first, then continue to the layout.

01 · Inside the drawer

Measure at several points and use the smallest usable size.

Keep the actual drawer measurements, even when they include sixteenths. Use fractions or decimals: 24 3/8, 24⅜, or 24.375.

02 · Fit allowance

Minimum space between the drawer and the outside of the organizer.

03 · Wood & grooves

Groove width matches board thickness. Lengths include the hidden portion of each joined end. Height starts at 2 3/8″ from the original file; adjust to his stock.

04 · Perimeter corners
Front-left corner · top view

Round the outside frame DOWN to the next 1/8 inch after the minimum gaps. Any extra clearance goes on the right and back. Thickness and height use eighths; the actual drawer, minimum gaps and 3/16-inch groove depth stay exact.

Existing layouts are converted when you apply this mode. Joined ends follow their supports. If a lock or collision prevents conversion, nothing is changed.